INSIF Cat No.PH-57 :
Object:Used by Anatomy & meat departments for cutting & packing of meat fish et.
*Sturdy base with large moving and extensive table working on ball bearing rollers.
*Table madke of aluminum or Stainless steel sheet.
*Supplied with one blade, starter, Cord plug etc.
*to work on 220v AC 50 Hz single phase.Table Size : 785x585mm Table Travel : 1245mm
*Optionlal : Spare cutting Blade.
INSIF Cat No.PH-58 :
Object:Constructed on heavy cast iron angles covered with thick guage mild steel sheet duly stove painted electrically operated Stainless steel Top Adjustment of the cutter of upward downward position.
*Total unit on casters for easy mobility.
INSIF Cat No.PH-59:
*A prespex organ bath with fine thermostatic temperature control.
*Complete with accessories,* bath size 8" x 4" x 5" with leak proof dovetailed joints,* fitted on sturdy metal frame.
INSIF Cat No.PH- 60:
Object:A Perspex organ bath with fine thermostatic temperature control, electric stirrer and complete set of accessories, making it a versatile unit for all research work.
*Bath 12"x9"x8", with leak proof dovetailed joints, resting in sturdy metal frame; top of the bath carries a 1"x3/8" thick band, for fixing accessories, inside the bath is a metal *sheathed heating element (easily replaceable) controlled by means of a fine adjustable thermostat with sensitivity ±1°C.
*The stirrer unit is completely independent and dips in the bath in one corner, fixing on its special stainless steel upright.
*A M.S. junction box is fitted to the bath frame and carries all the electrical leads and connections, two pilot lamps indicate functioning of the thermostat and stirrer.
*Double set of glass inner vessels Oxygen tubes
*Warming coils Two stainless steel capillary levers Four stainless steel uprights with boss heads X blocks.
INSIF Cat No.PH- 63 :
Object:(Latest with digital counter) For determining neuro-pixicity, muscle tone, balance and motor co-ordination in rats and mice.
*Consisting of two or three or four compartments of 75mm width each with a rotating rod of 25mm diameter having pm with time interval counter in each compartments.
A)2 compartments 1
b) 3 compartments 1
c) 4compartments 1
d) 5 compartments 1
*speeds of 5, 10, 15, 20 and 25 rpm with time interval counter in each compartments.
INSIF Cat No.PH- 64:
Object:This model of evaporator is supplied complete with A.C. non-sparking geared drive unit, support stand fitted with jack arrangement of stainless steel rod for positioning *glass assembly, variable speed regulator, thermostatically controlled stainless steel water bath fitted on a jack, double coiled glass condenser with three opening for vacuum and cooling, pear shape evaporating flask capacity 800ml. receiver flask capacity one litre with ball joint, feeding tube and vapor path tube, a complete working unit.
*All parts are power coated with epoxy / polyester hybrid, textured, Siemens grey finish.
INSIF Cat No.PH- 65 : :
Object:Can accommodate up to 7 sieves of 8" dia during a train or gears operated by a hand wheel.
*A heavy fly wheel ensured smooth operation.
*Supplied without test sieves and lid receiver.
INSIF Cat No.PH- 66 :
Object:Heater Mantle Type :
*Unit of three or six.
*Available in different capacities
*.Glass Parts : Complete with one flask and bulb condenser with interchangeable joints.
INSIF Cat No.PH-68
Object:Capacity 6 litre complete with chain/chord compensates counter balance to float through pulley.
*Tube calibrated to denote volume.
Inlet and outlet tubes provided .
*Complete with corrugated tube and mouth place
INSIF Cat No.PH-69 :
Object:Student type 0.25 pulse per second to 200 pulse per second in 11 steps.
*Pulse width selectable 1 ms and 2 ms. Operatable on 30vInternal pulse, external pulse adn single pulse mode.
INSIF Cat No.PH-70 :
Object:o Frequency continuously variable from 0.1Hz to 100Hz in 3 decades of 0.1 to 1, 1 to 10 and 10 to 100 selectable through push-button controls and one continuously variable control.
*Output voltage continuously variable from 0 to 30V in two steps of 1 to 3 and 1 to 30, selectable through a switch
INSIF Cat No.PH-72:
Object:made entirely from stainless steel, in two halves slopping towards the centre a small wedge over the whole length separates the two halves, under the wedge provided a *brass drain pican be washed clean the drain pipe removed, cleared and replaced the S.S. top is heated, a set of electric lamps placed to effect balanced heat distribution dog *holder with its SS upright slide along slot in the top useful for fixing accessories.
*A S.S. swing tray is fitted on a upright in one corner of the top useful for placing dissecting instruments accessories etc.
*Steep pipe frame handle and wheels for conscience in moving.
*Table top size 51" x 18" x 40" high.
INSIF Cat No.PH-73:
Object:Top adjustable for inclination stand, Suitable for Rabbits, Rats, Guinea Pigs and sulc like small animals.
Top is of Stainless steel and provided with adjustable head holder, tie cleats, cut back at the head end with warming chambers
INSIF Cat No.PH-76 : 3
*It consist of six channels to measure the temperature.
* cannels are selectable via switch on the panel.
* Show one temperature at a time with one probe
B) with six probes.
INSIF Cat No.PH- 77: U.V.
Object:Inspection cabinet for viewing and detecting separated substances on T.L.C. layers fitted with long wave (365nm) U.V. lamp for use on 220V A.C.
INSIF Cat No.PH- 78 :
The plant consists of one cation exchanger
INSIF Cat No.PH- 79:
Object: for study of shock motivated brightness discrimination responses in rats.
With wire grill,cue light, grill charge and rat presence indicators, adjustable shock stimulus 0.1 to 1.0 mA. remote control unit permits easy handling and operation of pre-programmed experimental procedure from distance without touching or disturbing the animal.
INSIF Cat No.PH-4U.V. Object:Inspection cabinet for viewing and detecting separated substances on T.L.C. layers fitted with long wave (365nm) U.V. lamp for use on 220V A.C. cabinet is made of wood having two chambers for keeping the samples in petri dishes fitted with black cloth both sides & front acrelic body to view the sample fitted with one ultraviolet tube & one flourcent tube provided with on/Off switches
INSIF Cat No.PH-5made of heavy cast ironhand operated provison for fitting four bottles at a timeit is suitable for fitting aluminium caps on small bottlesprovided with two types of punchesweight approx 35 kg
INSIF Cat No.PH-8
Object:For mixing & grinding, electrically operated having capacity of few gms to 1 KG & 2 KG.
*Fitted with geared motor with max speed of 80 rpm.
*The jar is made of SS and having steel balls of different sizes to be put in jar for mixing & grinding pesticides power.
*Jar is interchangeable and easily removable, light in weight and compact unit working on 220 V AC with 1 KG cap..B)-- do -- SS Drum 2 KG capacity
INSIF Cat No.PH-12
Object:A compact hand operated machine suitable to fill two part hard galantine capsules no. 0,1, & 2 interchangeable plates.
*Main body made of molded aluminum and all contact parts made of brass richly plated or stainless steel.
*Handle locking arrangement makes the operator to lift the loading plate without fear of damaging the capsules.
*Pressing is achieved by cam system which also saves time to press the plunges as compared to screw system.
*Plate of stainless steel for any one No. is supplied with machine. For filling 1900 or 200 capsules
INSIF Cat No.Ph-14 :
Object:Electrically operated. Used to find out disintegration of Tablets.
*The machine complies with specifications as per Indian Pharmacopoeia 1985.
*Complete with single basket
*With 2 basket
*OPTIONAL with digital temperature controller and TIMER
INSIF Cat No.PH-15
Object:Highly polished Hooper dia 2". Complete with suitable motor to work on 220V AC 50 Hz single phase. fitted with 4 steel hammers fixed to a disc of dia. 1.5" through
which passes a shaft being revolved at the speed of approximately 3000 RPM. Hammers are enclose Medium or fine supplied with the equipment.
INSIF Cat No.PH-16
Object:The apparatus consists of 4 parts.
*A water bath with 500 watt heater covered 1000ml.
*Vessel made from Borosil Glass and digital temperature control.
*Variable speed motor, with 30 cms longs stainless steel shaft.
*A cylindrical stainless steel basket and a membrane fixing attachment, water bath is made of imported thick acrylic sheet with transparent cover at top.
*Temperature of the bath is maintained at 37°C with an accuracy of ±1°C. A cylindrical glass vessel of 1000ml capacity with slightly concave bottom has a flenged edge at the top to accept a fitted cover having four holes.
*One hole placed in the centre.
*The shaft of the motor is fitted on an up right and has an electronic speed regulating device that allows the speed to be varied from 25 to 250 RPM.
*The shaft is 6mm dia 30cms on with basket fitted at end rotates smoothly and without any significant wobble.
*The basket consists of two parts one of which is attached to the shaft..
*Lower part of the basket is held with this part by means of threading and this allows proper removal of lower part for introduction of the test samples.
*The detachable part of the basket is fabricated of stainless steel mesh formed into cylinder of size 36mm x 25mm dia.
*The equipment is workable on 220 volts 50 C/s A.C. Six stages B) but three stages
Object:Used to determine the durability and abrasiveness of tablets.
*A transparent Perspex drum (made of imported Perspex sheet 6.4 mm thick) 300mm dia x 35mm deep and white cover disc and nut also a shaped radial fixed blade which carries the tablets along with it up to the central height and lets them off while the drum is rotating.
*Thus the tablets rub against each other without any hard impact.
*The drum rorotates at a fixed speed of 30 RPM by a geared motor and the rotation period is controlled by a timer (imported time switch duration 1 to 15 minutes) per determined end preset.
*The motor unit is housed in a shaped steel cabinet with shaft extended on one side upon which the drum rotates.
*Switches with neon indicators and time switch are fitted on a panel and provided work on 220 volts 50C/s ACDigital models also available.
A) Single Drum
-- do -- but with double drum
INSIF Cat No.PH- 19
Object:Suitable to fill tubes, bottles etc in the range of 5gms to 90gms. per stroke, motorized operated (motor 1/2 HP or DC geared motor) The unit is supplied complete with 3 set of standard nozzles and all electrical accessories in the motorized models.
INSIF Cat No.PH- 20
Object:Preferably Torsion with a removable glass pan or S.S pan suitable for weighing 50gms to 200gms and sensitivity 30gms for one division indicator shifting on the index plates (Known as dispensing balance) Available in following ranges 50gms 100gms
INSIF Cat No.PH-35
Object: it consist of six built in photo sensor and 4 digit digital counter to indicate the loco meter activity.
*It measures the also incorporates.
*The stimulus is variable from 0 to 100v& indicating on meter.
INSIF Cat No.PH-36
Object: Consisting of 30*30cms heating surface with Perspex enclosure and solid state temperature controller with micro-controller based digital temperature indicator to set *surface temp between 30 degree C to 80 degree C
*determining Analgesic effect f morphine in case of mice.
INSIF *Body made of m.s. sheet *coating pan made of stainless steel *separate polishing pan is also provided which can be placed by removing coating pan. thus this machine works both for coating & polishing of tablets *speed is vaible 50 rpm approx *0perates on 220V AC
INSIF Cat No.PH- 31:(Monsanto Type)
Object: useful to take quick reading from 0-20 kg pressure for hard less.
*The equipment is made of gunmetal and richly chrome plated.
*made of metal *long 12 inches *place for putting tablet *simple type *with graduated scale which shows the pressure applied to tablet to check hardness of table *the index and divisions of reading is 0.1 kg.
*complete in box .
INSIF Cat No.PH-31 b
Object: complete with dial gauge.
*Richly chrome plated machine parts.
*useful to take quick reading on dial, more accurate in grammas.
*all contact parts made of stainless steel.
1) Scale : 0-10 kg
2) Scale : 0-20 kg
INSIF Cat No.PH-23:
Object: for prepration of samples for analysis with minimum loss of moisture of volatile constituents.
*weight distribution and balancing of rotating parts has been adjusted to provide greater stability and quieter performance with reduced vibration.
*suitability for wider variety of commercial materials.
*fitted with 1/4 HP motor , supplied with nickel platted hopper of 50mm dia with cover , three delivery sieves , having tops of 20,40 and 80 mesh respectively , with plastic *receiver, brush, L-N key , cord and plug.
*suitable to operate on 220 volts, 1 ph, 50 cycles AC supply
INSIF Cat No.PH-24
Object: A 3 Liter cap. vat with lid made of stainless steel sheet fitted on a mild steel stout stand of circular shape provided on a suitable shat with blade for stirring provided on a suitable stand with height adjustment arrangement .
*A fractional H.P motor workable on 220V AC 50 Hz single phase , indicator , plug and cord provided.
INSIF Cat No.PH-27
Object: useful for making tables up to 100 mg.
*size of punch & die of 9 mm.
*Automatic compression and ejection device has been provided, actuated by revolution of the wheel drive .
*feed ad removal of tablets has also been made automatic.
*Accentric pressure system has been applied for easy setting of thickness and hardness of tablets.
*A S.S hopper has been given.
*the unit has been mounted on a mild steel fabrication.
*complete with one die and punch set made of chromium steel.
INSIF Cat No.PH- 27 b): (Electrically Operated)
Object: same as above but hammer type and provided with suitable motor workable on 220v AC 50 Hz single phase.
*optional: spare punch & die of chrome steel of 6,9 & 12mm.
*temperature 30dgree to 110 dgree C.
*switches for motor & blower are fixed on a panel with neon
INSIF Cat No.PH-28
Object: detachable polishing pan for use with tablet coating pan
made of mild steel painted and provided with inner lining of superior canvas cloth,* inner dia 12"*8"high with opening of 7"* dia neck used for polishing tablets
INSIF Cat No.PH-29 * 12" dia , Stainless steel.
Object: the machine is worked by oil immersed gearbox with 1/4 H.P. motor driven, or by heavy duty DC geared motor.
*Air blower is operated independently and air is thermostatically controlled to give
INSIF Cat No.PH-32
Object: Device for quick, convenient and correct counting of tablets.
*made of anodized aluminium sheet with pouring li and handle .
*Suitable for 100 tablets .
INSIF Cat No.PH-34
Object: new improved model built in solid state buzzer and stimulator to provide electrical shocks of 400V in pulsating rates 0.2 mA a frequency of 5 per sec for a duration *controlled manually or by built in 30 second timer.
*Output available for recording on Kymograh or polygraph complete to work on 220V AC.
Item has been added to cart. Subtotal $200.