INSIF Cat No.-O-1
Object:IS 3944,BS 3900,stand,’A’ cup with any one type of Jet.
*This type of cup has been in popular use of many years and confirms to IS 3944-1965 specifications.
*These are available in fllowing size.Jet No. B-1,B-2,B-3, B-4, B-5, B-6
*B) Spare Brass Cup with any size JET
FLOW CUP VISCOMETER
* This type of cup has been in popular use for many years and confirms to IS 3944-1965 specification.
* There are available in following sizes. Jet No, B-1,B-2,B-3,B-4,B-5 & B-6.
FLOW CUP VISCOMETER
* FLASH POINT APPARATUS
INSIF Cat No.-O-2
Object:as per BS 434,ASTMD 490 & IP212,Lubricates,Fuel INSIF Cat No.-OsElectrical with Energy Regulator.
*Used for determining the viscosity of fuels INSIF Cat No.-Os.
*B)dowith voltage varrier
*C) ASTM 24C thermometer
INSIF Cat No.-O-3
Object: These viscometer are designed for viscosity tests of petroleum products.
*They confirm to requirements of IP 70 (former).
*Two adaption of Red Wood Viscometer are available No.1 for liquids havind Red Wood Flow 20 seconds,
*No. 2 for liquids whose flow time exceeds 2000 seconds.
*A No 1Electric
*B No 1Gas Heated
*C No1 with digital indicator & FHP Motor Stirrer
*D No 2 Electric
*E Thermometer IP 8’C(0/45’C700.0
*F do -P 9C
INSIF Cat No.-O-6
Object:Specifications with universal and Furol Jets made of stainless steel.
*Stirring is done by hand with turn table arrangement (without stirrer,with drawl Tube and glass wares.
*Suitable to operate on 220 Volts Ac mains.
*Electric with Ener5gy Regulator.
*B) Therometer ASTM 17C(19 to 27’C) or ASTM 21C(79 to 87’C)
SAYBOLT VISCOMETER APPARATUS
* Made as per ASTMD-88 specifications with Universal and Furol Jets made copper.
* Stirring is done by hand with turn table arrangements (without strainer, withdrawl tube and glass wares).
* Suitable to operate on 220 volts AC mains.
* SPARE CUP WITHOUT JETS
* SPARE JET UNIVERSAL
* SPARE JET FUROL
* FLASK 60cc
* ASTM 17C THERMOMETER
* ASTM 18 C THERMOMETER
* ASTM 19C THERMOMETER
* ASTM 20C THERMOMETER
* ASTM 21C THERMOMETER
* ASTM 22C THERMOMETER
INSIF Cat No.-O-9
Object:as per IS 101 & 197 with one 1000 gms. Wt and 500 gms. Wt. but without panel and 200 & 100 gms. Wt.
*Hand operated model ,
*Electrical motorized A200 volt
INSIF Cat No.-O-12
Object:This apparatus is made as per IP 34 & IS:1488 method .
*The apparatus consists of brass test cup with handle removable cup cover with spring operated rotating shutter having INSIF Cat No.-O Test Jet/ Gas Test Jet Flame Device, stirrer with flexible shaft.The assembly rests in air Bath which is covered with Dome shape metal top.
*Elecyric with energy regulator
*B)Therometer IP 28C (-5to 400’C)
INSIF Cat No.-O-13
Object:as per IS 33/59&IS 1448 Electric –
*It is used for determining the close cup flash point of petroleum and mixtures accordindto IP 33 and IP 170.
*It is suitable for INSIF Cat No.-Os whose flashes below 70 deg.
*C) it is supplied with INSIF Cat No.-O cup ,
*Cover fitted with stirrer,
*Thermometer socket S.S Water Bath,Stand.
*An electric heater is fitted at bottom for operation on 220V AC Circuits.
*B)Thermometer IP 74C (-35 to 70’C) or IP 75C(-30 to 80’C)
INSIF Cat No.-O-14
Object:It is used for determining the correct constant Temperature for estimating Kinetic viscosity of INSIF Cat No.-Os & Petroleum product.
*In this type of bath various Viscometer may be fixed as an internal part of bath. This bath is rectangular in shape.
*Inside tank made of S.S sheet.
*The bath is controlled by an electric relay and contact thermometer. Digital
INSIF Cat No.-O-15
Object:It i8s used for determination of heat of heat of combustion.,
*Calorific value and sulphur contents of solid and liquid fuels.
*The Bomd body and lid are machined bfor corrosion resisting stainless steel rod.
*Iot capacity is approx.
*300ml it is provided with high pressure value any electrodes.
*The Calorimeter vessel,Water jacket,
*Stirrer FHP motor driven are provided as per IP standards .
*The bomb calorimeter is suppied with firing unit with Electronic Digital thermometer,
*Pellet press,Ignition wire,
*And pressure gauge on stand with copper pipe fitting .
Spare bomb 300ml. cap.
B) spare Neoprene washer for bomb,
C)spare stainless steel Crucible.
INSIF Cat No.-O-17 (Rams Bottom)
Object:its is made as per IP 14,
*ASTM 524 AND IS 1448(P:8)-1967 standards .
*It is used to determine the amount of carbon deposit when an INSIF Cat No.-O evaporated under specified condition bulbs,
*The heavy duty heating elements provided around the bath.
*Supplied with 5 cocking bulbs,And one syringe.
INSIF Cat No.-O-18 (Conradson)
Object:It is made as per IP 13,
*ASTM D-189 Specifications.
*It is useful to determine amount of carbon residue when an Residuam etc.
*The apparatus consists of spun sheet iron crucible 25c c capacity , sheet Iron hood and sheet iron block on a stand ,Gas burner.
*Conrad son carbon Residue single Test Apparatus
INSIF Cat No.-O-19
Object:This is made according to specification laid by IP 15 & IS 1448 (p : 10 ) 1970.
*The pour point is lowest temperature at which the INSIF Cat No.-O will just fail to flow.
*The apparatus consists main cooling bath made out of S.S sheet and stand unit with drain plug and over has provision for fitting thermometer and a filling apertune for adding *freezing mixture. A Glass jar for containing , jacket, disc and gasket as specified are also provider.
*Cloud b& Pour single TEST with insulated body.
INSIF Cat No.-O-20
Object:with refrigeration System (for 2 test app.)
*a)cloud& pour point thermometer IP IC ,
*b)cloud& pour point thermometer IP 2
*C )spare Glass jar with cork.
*D) sparemetel jacket with Disc,
*e) polish wooden case for above
*f)rexine dust cover for refrigeration unit.
INSIF Cat No.-O-21
Object:With igital temp.controller& Indicator Double walled stainless steel chamber made of mild steel sheet attractive painted .
*As per IP 154 and IS 1448 (p-15 ) to accommodate 6 bombs.
*Temperature is controlled by Electronics Digital Controller (without S.S.BOMB)omparison chart (Indigeneous)
INSIF Cat No.-O-22
Object:as per IP 31 and 132 and D-566 specification – As per IP 31 the app.
* Consists of Brass Sleeve and case with metel cup and a glass bINSIF Cat No.-Oing tube with cork fitted to a bath 600ml beaker is provided.
*As per IP 132 the unit comprises a glass beaker with fiber cover together with cover together with glass test tube with three indentations to receive Chromium platted Brass cup.
*B) –DO- as per IS 132 & ASTMD 566.
INSIF Cat No.-O-23
Object:Made as per Ip 69 & IS 1448 (p:39). 1967 elect .
*Heated with fhp motor stirrer temp. controlled by Electronic Digital Temp.
*Controller and indicator (without bomb and accessories), ,
INSIF Cat No.-O-24 (Ring & Ballapparatus)
Object:Softening point Apparatus(without Glass Beaker),
*For determination of softening point of bituminious
*materials according to IP 58 and IS 1205- 1958.
*softening point is that temperature at which the specimen under test becomes soft enough to allow a steel ball of specific dimensions to fall a required distance under test condition.
*The apparatus consists of glass beaker,Ring stand ,
*Two steel balls with rings and ball guides,Hand stirrer,
Thermometer IP 60 C,
Thermometer IP 61 C,
B) –do- with F.H.P.Elect. motor driven stirrer and electric heater
INSIF Cat No.-O-25
Object:as per IP 2& IS 1448 (P-3)ASTMD 611
Method A, Complete With Jacket (Without Thermometer)
*B) –DO- method b BY Thin Film Method,
*Electrically heated with motorized stirrer (without thermometer) ,Spare Tap,Spare Contraction chamber,
*C)-do- METHOD ‘D’ by U-TUBL method electrically heated with motorized stirrer without thermometer
INSIF Cat No.-O-26
Object:For estimation of moisture in lubricating as per P-74,
*ASTM D 95 IS 1448 (P-40) with one 10 cc receive Flask,
*Condenser with clamp holder.And Elect.
*Heater with Energy Regulator