Color Scheme:

Cement Testing Equipments

Ball Mill

Ball Mill

Ball Mill we offer is used for dispersion of enamels and primers. Our offered mill is manufactured under the guidance of proficient professionals consists of a hollow cylindrical shell rotating about its axis in sync with industry norms. Owing to its varied features, this mill is appreciated in the market.


Features:

  • High efficiency
  • Automatic switching
  • Flawless performance

Blain Air Permeability Apparatus

Blain Air Permeability Apparatus

Product Details:

Minimum Order Quantity

1 Piece

Manometer

U Tube

Stainless steel permeability cell

12.5mm



Description :

Blaine Air Permeability Apparatus is used to determine the fineness of Portland cement in terms of the specific surface expressed as total surface area in square centimeters per gram of cement. The Blaine apparatus draws a defined volume of air through a prepared bed of cement of defined porosity



Features:


The apparatus comprises one each of Brass or stainless steel permeability cell 12.5mm,U tube manometer with stop cock mounted on a laminated wooden stand, perforated metal disc, plunger, Rubber stopper, Rubber tube - 30cm long with rubber bulb

Cement Autoclave

Product Details:

Minimum Order Quantity

1 Piece

Inside chamber dimensions

15 cm dia x 40.5cm height.

Power Rating

2000 watts

Pressure range

21 kg/cm2

Least Count

04 kg/cm2

Temp. range

215 deg C

Power supply

230 Volts AC , 15 Amp


Laboratory Cement Autoclave

Introduction:
After it has set, cement must not undergo any appreciable expansion, which could disrupt a mortar or concrete. This property of soundness is tested by subjecting the set cement to boiling in water or to high-pressure steam. Unsoundness can arise from the presence in the cement of too much free magnesia or hard-burned free lime

This method covers determination of the autoclave expansion of Portland cement by means of a test of neat cement paste specimens, 25.4 X 25.4 X 285.8mm, which are moist cured for 24 hours +/- 1-1/2 hours and then exposed to action of steam under specified pressure for 3 hours. The rate at which pressure is increased in the beginning the test and released in the test are specified. Linear expansion is measured by micrometer comparator.

Silent Features:

·       Rust proof stainless steel pressure vessel

·       Specially designed Steam Safety Valve, pressure control switch and Temp. control switch - Triple Safety precautions for operator safety

·       Accurately Calibrated Pressure Gauge

·       Guaranteed timings and performance as per IS 4031

·       General Description & Specifications

·       The Autoclave is double walled. Inner boiler chamber of stainless steel cylinder, with concealed yet easily replaceable heaters surrounding the vessel for quick heating. The boiler lid is of thick stainless steel and can be bolted to the chamber by heavy hexagonal nuts. The silicon gasket, seated in a groove, makes the unit leak proof even at high pressure. The boiler is mounted in between the strong angle iron frame and covered with CRC sheet – attractively powder coated. The outer cover can also be of Stainless steel at an extra cost. The gap in between the walls is filled with thermal insulation to prevent heat loss and energy. The control system


Consist of sensitive pressure regulator, pressure gauge, safety valve, temperature control s witch, power ON-OFF switch and pilot lights to indicate status of the electric heating units and control switches.

Flow Table (Hand Operated)

Flow Table (Hand Operated)


Flow Table The offered flow table is inspected by our quality analyst on diverse parameters so as to supply defect free range to customers. As well, our flow table is provided in several specifications as per the needs of customers. Our flow table can be purchased at nominal rates within the committed time - frame.  

Features: 
 Robust structure Efficient performance Durable 

 Available In Models: 
A. Hand operated with M.S. table top 
B. Motorised with M.S. table top 
C. Hand operated with Gun Metal table top 
D. Motorised with Gun Metal table top

Flow Table Test insif

Gauging Trowel

Gauging Trowel


In addition to this, our range is manufactured by making use of optimum grade raw material that is further quality tested by our team of quality controllers who make sure to test the whole lot before its dispatch at the patrons end.

Applications:
  • Plants
  • Heavy metal industries
  • Agricultural sectors

Humidity Chamber

Product Details:

Minimum Order Quantity

1 Piece

Brand

INSIF

Model

Humidity Chamber

Size

45CMS x45CMS x45CMS



Humidity Chamber

·       A key lockable insulated door having positive door gasket seals doom perfectly.

·       Vertical air circulation ensures temperature and RH uniformity.

·       Digitally set, temperature and Humidity controller with direct digital read out in temperature and percentage RH.

·       Double walled construction inner chamber S.S. and outside of Mild steel beautifully powder coated.

·       Low pressure Boiler which generates steam for chamber humidification.

·       Most accurate and reliable chamber for long term high temperature and RH testing.

·       Temp. Range 10 C to 60 C with an accuracy +- 0.5 C. Relative humidity range 35% RH to 95% RH with an accuracy +- 3% RH

·       The chamber with modular removable shelves made of S.Steel.

·       Automated refrigeration system.

Specifications:

Standard Sizes Available In

Sr. NO.

Size In CMS

1

(45 x 45 x 45 cm.)

2

(71 x 45 x 45 cm.)

3

(80 x 50 x 50 cm.)

4

(100 x 90 x 90 cm.)

Le Chatelier Mould

Le Chatelier Mould

Product Details:

Usage

Cement testing machine

Material

Steel

Type

Mould


The main purpose of the soundness test is to assess the possible risk of late expansion due to hydration of uncombined calcium oxide and/or magnesium oxide. The test uses apparatus known as Le Chatlier apparatus, which magnifies any expansion during heating to a value that can be measured.

General Description & Specification:
The apparatus consist of a small split cylinder of spring brass or other non-corrodible metal of 0.5 mm thickness forming a mould 30 mm internal diameter and 30 mm high. On either side of the split, two indicators are brazed suitably with pointed ends made of 2 mm diameter brass wire in such a way that the distance of these ends to the centre of the cylinder is 165 mm. The split cylinder will be kept between two glass plates.

Water Bath For Le-Chatelier Test
Water bath capable of containing immersed Le-Chatlier moulds with specimens and of raising their temperature from 27 deg _ 2 deg C to boiling in 27 /- 3 minutes.
Made of double walled, Outer made of CRC Sheet – powder coated or stainless steel and inside made of stainless steel. Gap between the wall filled by glass wool to avoid heat losses. Temperature is controlled by sensitive thermostat and temp. read on Glass Thermometer or DIGITAL Temp. Indicator cum controller with timer programmed to achieve boiling temp. in prescribed time. The bath is suitable to accommodate six moulds at a time. Complete with stand to hold Le-Chatlier moulds in prescribed method. Complete with three core wire and 15 Amp. Three pin top,
Weighing balance accurate up to 0.1gm


Optional Accessories:

  • Weighing balance accurate up to 0.1g
  • Measuring cylinder
  • Stop watch
  • Trowel
  • Tray

Length Comparator

Length Comparator

Product Details:

Usage

Cement testing machine

Material

Steel

Type

Testing machine



Length Comparator:

It is used to measure the drying shrinkage of autoclaved Portland cement and potential expansive reactivity of Cement aggregate combinations in mortar bars during storage on self-drying.

Low Temperature Cabinet

Low-Temperature Cabinet we offered is manufactured for corrosive atmosphere negating the chances of fumes entering the unit using the finest quality stainless steel and modern technology in line with industry norms. HP or LP switch provided to high or low pressure cut off, provided cabinet is available in different designs and specifications. 

Specifications

Model

Vertical / Horizontal

Temperature range

-80°C / -40°C / -20°C to Ambient

Vertical model capacity

100, 170, 270, 325 liters

Horizontal model capacity

195, 255, 349 liters

Controller

Selec / PPI / Eurotherm

Controlling Accuracy

0.2°C

Sensor

PT-100, Class A.

Alarm

Temperature deviation high and low.

Outer

MS with powder coated / SS 304.

Inner

SS 304

Insulation

PUF.

Door

Double walled door inner lined with SS, SS handle, lock with key and magnetic gasket.

Mobility

Heavy duty castor wheels.

Compressor

Emerson / Danfoss


Features:

·       Elegant design

·       Excellent functionality

·       Compatible

Mortar Mixer

Product Details:

Minimum Order Quantity

1 Piece

Brand/Make

Insif

Capacity

5 Litres to 20 Litres

Model/Type

Steco- Morta Mixer



Other Details:

·       It is used for mixing cement pastes, mortars and pozzolanas

·       The mixer consists of an epicyclical type stainless steel paddle imparting both planetary and revolving motion

·       Mixer has two speeds. Mixer blade has low speed of 140 + 5 rpm and medium speed of 285 + 10 rpm, while it also has a planetary movement of 62 + 5 rpm in low range and planetary movement of 125 + 10 rpm in medium range

·       Stainless steel bowl fitted with handle, fitted with lid made of non-absorbing material and not attacked by cement, masonry cement, cement pozzolana mixture or lime pozzolana mixture

·       The scraper consists of semi rigid rubber blade attached to a handle about 150 mm long

·       The blade about 75 mm long, 50 mm wide and tapered to a thin edge. Suitable for operation on 230 Volts, single phase


General Description & Specification:

·       Relevant Standard : IS : 4031, IS : 1727

Planetary Mixer

Planetary Mixer

Product Details:

Minimum Order Quantity

1 Piece

Brand

Insif

Capacity

100 to 200 Kg

Design Type

Standard

Model

Optional



Planetary Mixer which is a device utilized for mixing round products including adhesives, pharmaceuticals, foods, chemicals, electronics, plastics and pigments. It gives smooth operation owing to its rotating system and blade-mounting system that assists in smooth replacement of blade. Our Industrial machines need lesser maintenance and saves time and production cost. Available with different specifications and capacities, these mixers are suited for mixing pastes and cosmetics.

 

Features:

·       Stand Model

·       Three Fixed Speed

·       Easy Speed Shifting

Standard Spatula

Standard Spatula

Product Details:

Minimum Order Quantity

1 Piece

Material

Stainless steel with wooden handle.

Width of blade

2.5 cm appropriate thickness.

Size of blade

20 cm long.


By keeping track of current market development, we are offering an excellent range of Standard Spatula. Used while casting a cement briquette, this spatula is manufactured using the best quality steel blade and modern technology in sync with industry standards. A wooden handle is fixed to the stem of blade, this spatula is quality checked on various parameters in order to ensure its quality. 

Features:

·       Easy to use

·       Low maintenance

·       Sturdy construction

Tensile (Briquette) Testing Machine

Tensile (Briquette) Testing Machine

Product Details:

Usage

Tensile Testing Machine

Power

Electronic

Operation Type

Manual volume control


We are well known industry in market as the foremost manufacturer, trader and supplier of Tensile (Briquette) Testing Machine that is used for testing various materials like rubber, plastic and cable. The offered testing machine is manufactured using optimum quality components and sophisticated technology in line with industry standards. Available with steel yard having double scale, this testing machine is checked on varied quality measures so as to maintain its quality. 

Features:

·       Smooth functioning

·       Easy to operate

·       Automatic function


General Description & Specification:

·       0-500 Kg. Complete with one briquette mould and set of weights to weigh 50, 100, 150 and 200 kg. without lead shot.


Optional Accessories:

·       0-900 Kg. The instrument employs of friction free, accurate, double, lever system, the load being applied by means sliding weight on the top lever The capacity of the unit is 900 kgs. After fixing the briquette in the jaws, the machine is swithched on. The sliding weights slides over the calibrated lever thus applying tension to the specimen

·       A micron-Switch fitted instantly stops the machine on failure of the briquette and on failure the tensile load is accurately read to 0.5 Kg by means of a marker provided on the sliding weight. The machine can be made operationable for subsequent test only after bringing the sliding the weight to its zero position. Suitable for operation on 230 volts, 50 cycles, single phase

·       A.C. supply. Complete with one brass briquette mould and one base plate.

Item has been added to cart. Subtotal $200.

OEM & Tenders

Dealership

Order Now

Order Now